Best 17 45 Lc Brass Castings: A Guide

45 LC brass is a specialized wire material that combines exceptional conductivity with remarkable flexibility. Our roundup highlights the top brass wire options that meet or exceed 45 LC standards, comparing their electrical properties, manufacturing techniques, and applications to help you choose the right wire for your project.

As an Amazon Affiliate™, I receive compensation through qualified purchases

Reviews

LTWFITTING Brass 45 Lc Flare Tube Fitting

These brass 45-degree flare nuts come in packs of 20 and offer a durable connection solution for copper, brass, aluminum, or steel tubing. Each piece is designed to handle connections between flared tubes or fittings, providing a reliable seal in a variety of applications. The long 3/8-inch outer diameter ensures a secure fit while maintaining the flexibility needed for proper flaring.

Elbow 45 Brass CompxF 3/8in PK10

This handy brass elbow connector makes it easier to adjust plumbing routes with its 45-degree bend. The compression fitting design lets you install it quickly without soldering or threading. At 3/8 inch diameter, it’s perfect for small pipes and tubes that need a bit of directional change.

45 Degree Street Brass Elbow

This brass elbow connects corrosive materials in pipes, featuring a 45-degree bend that resists wear in low to medium pressure systems. The lead-free design ensures safe handling of fluids, while the standardizedoutside diameter (OD) sizing simplifies installation. The specialized pipe threading prevents cross-connections with other common fitting types, ensuring a secure seal in critical applications.

1-1/2 inch Lead Free Brass 45 Degree Elbow

When you need to join copper pipes at a 45-degree angle for water or gas lines, this brass elbow does the job perfectly. It’s lead-free and can handle up to 125 pounds per square inch of steam pressure or 200 psi for water, oil, and gas. The red brass material is more corrosion-resistant than yellow brass, making it last longer in wet environments. The soft metal makes it easy to install while still ensuring a tight seal.

45 Degree Brass Elbow

This brass street elbow features durable 3/4-inch NPT connections and meets multiple industry standards, including the Safe Drinking Water Act requirements for lead-free potable water applications. The corrosion-resistant brass construction handles pressures up to 125 psi and temperature extremes from -20° to 400°F, making it suitable for a variety of industrial and plumbing uses. The 45-degree bend maintains clean lines while providing reliable flow direction changes in both potable and non-potable water systems.

Parker VS2214P-12-12 45 Elbow

This handy Parker fitting connects 3/4-inch pipes with female-nipple and male-nipple threads, and it’s made to last in tough industrial settings where water, oil, and natural gas flow through brass, copper, and iron tubes. The bronze-colored brass construction handles up to 1,000 pounds of pressure and works best when you snug it up with Loctite Vibra-Seal thread sealant.

45 Elbow Brass F Bpst Class 125

Made for serious plumbing and industrial jobs, this shiny brass elbow bends at a perfect 45 degrees to connect pipes. It’s built to last with a sturdy 2-inch diameter and can handle everything from clean water to natural gas. The clever FBSPT threading makes it easy to snap on fittings, while its tough class 125 rating means it’ll keep your system sealed tight under 200 PSI of pressure.

LTWFITTING 3/8” OD Brass Flare Nut

Made from durable brass, these 3/8” OD flare nuts connect lines for air, water, fuel, and other gases in a quick, reliable way. Each nut weighs just 36 grams, while the set of five comes from a factory with 25 years of experience and ISO 9001 quality certification. The China-made nuts ship via air mail, typically arriving in the US in 1-2 weeks.

Proplus Brass 45 Degree Elbow

This charming brass elbow features a simple screwed design that matches the natural copper tone of the metal. At just half an inch in diameter, it’s a compact addition to any plumbing project, while its lead-free construction ensures peace of mind.

45 Degree Brass Pipe Elbow

This brass elbow features a 45-degree angle and is designed for low-pressure applications, including water, oil, and gas systems. The lead-free fitting connects female threads to female threads and meets ANSI standards for plumbing and industrial use. With a 125 psi pressure rating and a temperature range of -20 to 400°F, it provides a reliable connection in both commercial and industrial settings.

45 Degree Brass Elbow

When you need a 45-degree elbow that’s built to last, this brass fitting ticks all the right boxes. It’s got that reliable NPT connection you’d expect from a quality brass piece, and it’s NSF 61 certified for added peace of mind. With its solid brass construction, this little elbow knows how to turn heads (and corners) in any setup.

Brass Pipe Fitting

Crafted from corrosion-resistant brass, this 45-degree elbow connects two 1-1/2-inch NPT pipes, with a female threading on both sides. The class 250 rating makes it suitable for medium-pressure applications up to 400 psi. At 3-1/2 inches long, it provides a reliable 2-2/3 inch bend for directing water flow in plumbing systems.

Parker 1201P-8-8 45 Elbow, Brass FNPT

Crafted from durable brass, this 1/2 inch pipe elbow forms a smooth 45-degree turn between sections of 1/2 inch pipe fitting to the required standards of SAE J530 and J531. The Dryseal threads ensure a tight, leak-free connection even under pressure. With a maximum working pressure of 1,000 psi and a temperature range from 65° to 250° F, it’s built to last in both residential and commercial settings.

Legines 45 Degree Street Elbow

This brass elbow fitting connects two pipes at a 45-degree angle using NPT threads, combining corrosion resistance with high-temperature stability for industrial or residential plumbing applications.

45 Street Elbow Red Brass

This red brass street elbow features a 45-degree bend and connects male and female pipe threads. Made to meet ASTM, ASME, and ANSI standards, it handles up to 125 psi at temperatures between -20 and 400 degrees F.

T&S Brass 45 LC Ceramic Cartridge

With its tan-colored ceramic construction, this 017441-45 cartridge brings a warm touch to your shower valve while providing reliable performance. The brass body resists corrosion and handles high temperatures, ensuring your faucet stays smooth-operating for years to come. It’s a simple drop-in replacement that lets you keep on using your existing shower setup without hassle.

HSM Brass 45 ACP Once Fired

Handy 100-count box of once-fired 45 ACP brass cases that’s already deprimed, reamed, and finished to full length size – all you need to do is load up and shoot these premium-quality casing blanks.

Buyer’s Guide

When selecting brass products, particularly those measuring 45 LC, several factors influence performance and longevity. Understanding these aspects helps in choosing components that meet specific requirements while ensuring compatibility across various systems.

Size and Compatibility

45 LC brass components adhere to standardized dimensions derived from metric measurements. These dimensions ensure consistent mating across similar systems, but compatibility extends to pressure ratings and material specifications specific to intended applications.

Material Quality

Brass composition affects durability and resistance to corrosion. Higher copper content improves strength and conductive properties but increases cost. Premium grades incorporate zinc for enhanced wear resistance, ideal for high-stress applications.

Surface Finish

Finishing processes impact both aesthetics and functionality. Polished finishes enhance visual appeal and inhibit oxidation, while matte finishes provide better grip and resist fingerprints. Consider the application environment - harsh conditions may require more robust protection.

Manufacturing Standards

Compliance with international standards (e. g. , ISO, DIN) ensures consistent quality and performance. These standards address dimensional tolerances, material specifications, and testing requirements, providing a benchmark for reliable performance across different manufacturers.

FAQ

What exactly is 45 Lc Brass?

45 Lc Brass is a specific grade of brass alloy characterized by its excellent cold-working properties and high ductility. This brass grade contains approximately 45% copper and 55% zinc, along with small amounts of other elements that enhance its mechanical properties.

When cold-worked, these brass parts exhibit improved strength and corrosion resistance, making them ideal for applications requiring dimensional stability and forming ability.

What makes 45 Lc Brass unique compared to other brass grades?

Unlike some other brass alloys that require additional treatments for cold working, 45 Lc Brass can be cold-worked directly without losing its useful properties. This unique characteristic allows for greater design flexibility in manufacturing processes.

The alloy’s combination of superior cold-rolling capabilities and good corrosion resistance sets it apart, making it particularly suitable for applications where precise dimensions and optimal performance are crucial.

How is 45 Lc Brass typically processed?

Common processing methods include cold rolling, extrusion, and drawing. These operations capitalize on its exceptional ductility, allowing for the creation of complex shapes and fine tolerances.

The alloy requires careful monitoring during processing due to its sensitivity to work hardening, which can affect its properties if not properly controlled.

What are typical applications for 45 Lc Brass?

Applications include spring components, bushings, and decorative pieces that demand consistent dimensional accuracy and strength. Its cold-working capabilities make it ideal for precision parts requiring minimal further machining.

The material’s resistance to corrosion combined with its ease of shaping makes it popular for both industrial and consumer goods that need metal parts with specific size and form requirements.

How does 45 Lc Brass compare in cost to other brass grades?

While exact pricing varies based on market conditions and quantity, 45 Lc Brass generally falls between mid-range and premium brass grades due to its specific properties and processing requirements.

The material’s superior cold-working properties can reduce overall manufacturing costs by minimizing additional treatments and post-processing steps often required with other brass alloys.

What are the key considerations when selecting 45 Lc Brass?

Design requirements, mechanical property specifications, and cost considerations all play important roles. The material’s behavior during cold working and its dimensional stability over time are particularly crucial factors.

Proper selection also involves understanding the alloy’s potential for work hardening during processing and its specific performance characteristics compared to other available materials.

As an Amazon Affiliate™, I receive compensation through qualified purchases